Precision-fabricated outdoor racks, IP65 integrated power shelters, and high-voltage metering cabinets manufactured for high humidity and tropical deployment environments across Malaysia.
Adapting infrastructure design to the specific physical, thermal, and regulatory demands of Peninsular Malaysia, Sabah, and Sarawak.
Under Malaysia's JENDELA (Jaringan Prihatin) national digital plan and Digital Nasional Berhad’s (DNB) multi-operator 5G rollout, outdoor telecom sites are migrating toward decentralized micro-cell architecture. Modern telecom enclosures must host high-density Active Antenna Units (AAU), Baseband Units (BBU), and DC rectifiers in single or dual-compartment street cabinets.
Our custom telecom cabinets serving Malaysia are designed to comply with local municipal guidelines (such as DBKL, MBI, and MBPJ spatial policies) while meeting stringent national commission standards (MCMC/SKMM), ensuring rapid site deployment across metro centers like Kuala Lumpur, Penang, and Johor Bahru.
Operating outdoor telecom infrastructure in Malaysia presents extreme environmental challenges. Continuous relative humidity hovering between 80% and 98%, year-round ambient temperatures topping 35°C, and heavy monsoon rains demand robust protection against moisture ingress, thermal runaway, and condensation failure.
We manufacture cabinets using high-grade galvanized steel, 304/316 marine stainless steel, or lightweight 5052 aluminum alloys treated with architectural-grade outdoor epoxy-polyester powder coating. This delivers exceptional protection exceeding C4/C5 atmospheric corrosion standards, ideal for coastal sites like Kuantan, Port Klang, and Kota Kinabalu.
Selecting the optimal thermal management, structure, and power system integration for Malaysian field deployments.
| Cabinet Category | Primary Application Scenario | Thermal Control Tech | Ingress Protection | DC Power Integration |
|---|---|---|---|---|
| IP65 NEMA Outdoor Telecom Cabinet | 5G/4G Macro base stations, remote cell sites, fiber-to-the-home (FTTH) hubs. | Industrial R134a/R410a Air Conditioner (500W–3000W) or Heat Exchanger. | IP65 / NEMA 4X Sealed dual-wall insulated enclosure. | Integrated 48VDC hot-swap rectifier system, LVD, battery backup bank. |
| IP54 Outdoor Stainless/Aluminum Box | Street-side distribution, roadside ITS monitoring, outdoor fiber splice boxes. | Direct ventilation with dust filters, emergency bypass fans, sunshield roof. | IP54 / NEMA 3R rain-proof & anti-vandalism structure. | Single/Dual AC distribution panel, optional DIN-rail DC supply. |
| 42U Smart Micro Data Center Cabinet | Edge computing hubs, enterprise server rooms, municipal smart city nodes. | Closed-loop rack-mount precision air conditioner with inverter compressor. | IP55 Dust & Splash proof internal containment. | Monitored PDU, online double-conversion UPS, intelligent remote Ethernet management. |
| KYN61-40.5KV Metal Switchgear Enclosure | Utility sub-stations, high-voltage industrial power distribution plants. | Natural convection channels with dynamic anti-condensation heaters. | IP4X Armored metal enclosure with internal arc flash protection. | High voltage metering panels, protective relay bus systems. |
| Wall-Mounted CCTV Telecom Cabinet | Surveillance nodes, toll plaza camera racks, perimeter security systems. | Thermostat-controlled dual brushless DC axial cooling fans. | IP55 Outdoor wall/pole mount setup with heavy-duty brackets. | 12V/24V DC step-down power supply modules with surge protection. |
Combining North American engineering rigor with agile manufacturing to deliver complete end-to-end site reliability.
In partnership with world-class power conversion engineering standards, our outdoor cabinets feature integrated intelligent DC power systems. Featuring 12V, 24V, and 48VDC output architectures with hot-swappable rectifier modules, battery temperature compensation, and Low Voltage Disconnect (LVD) to prevent deep-discharge battery degradation.
Unattended remote sites across Sarawak rainforests or East Coast highways require total operational visibility. Our enclosures integrate web-based remote power management consoles and SNMP v2c/v3 reporting. Network engineers can read per-circuit current draw, check internal humidity/temperature levels, and remotely reboot locked-up routers without dispatching field crews.
Prevent internal solar heat gain with double-walled insulated cabinet paneling (PU or PE foam insulation layer) and top sunshade roofs. Choose between compressor-based refrigeration units, air-to-air heat exchangers, or smart DC variable-speed cooling fans that maximize energy efficiency while keeping active electronics under 28°C continuous operating threshold.
Custom cabinet configurations tailored for specific localized operational requirements.
Integrated outdoor 19-inch battery and BBU cabinets tailored for rural cell sites in Sabah and Sarawak. Built-in high-capacity lithium battery racks, solar charge controller integration, and lightning surge protection (Class II SPD) built to survive frequent tropical lightning strikes.
Enclosures deployed along the East Coast Rail Link (ECRL), LRT/MRT lines, and PLUS Highway networks. Designed to house SCADA remote terminal units, optical transmission gear, and emergency telephone power systems with high shock and vibration resistance.
Custom 316-grade stainless steel cabinets engineered for offshore terminals in Kerteh, Miri, and Pengerang. Resistant to marine atmosphere salinity, sulfur gas exposure, and torrential downpours with IP66 ingress sealing and certified anti-vandal lock hardware.
Direct answers regarding customization, international compliance standards, shipping logistics, and local climate optimization.
Our telecom cabinets engineered for Malaysia feature a multi-layer thermal management approach. First, double-wall insulated construction prevents direct solar thermal radiation from penetrating the cabinet interior. Second, we integrate closed-loop air conditioners or air-to-air heat exchangers that continuously dehumidify the internal chamber while keeping moisture out, avoiding condensation on sensitive PCBA circuits.
For coastal sites within 5 km of the sea (e.g., Penang Island, Kemaman, Kota Kinabalu), we strongly recommend 5052 Marine-Grade Aluminum or 316 Stainless Steel. All surfaces undergo a multi-stage chemical pretreatment followed by electrostatic application of thermosetting TGIC polyester powder coating, passing 1,000+ hours of continuous salt-spray testing.
Yes. We offer fully integrated turnkey enclosures pre-fitted with intelligent DC power systems, hot-swappable rectifier modules, AC/DC distribution breakers, low voltage disconnect (LVD) contactors, and dedicated climate-controlled battery compartments for VRLA or LiFePO4 battery strings.
All outdoor telecom cabinets comply with global certification standards including IEC 60529 (IP54/IP55/IP66 testing), NEMA 250 (NEMA 3R/4/4X ratings), ETL certification, and ISO 9001/14001 manufacturing quality control protocols.
We provide extensive OEM/ODM customization including custom plinth designs, internal rack spacing (19-inch/23-inch ETSI), cable gland entry locations, multi-compartment isolation (separate power and battery chambers), custom exterior paint colors (RAL standard), and integrated smart door sensor alarms.
Standard model production lead time is typically 2 to 3 weeks. We regularly ship FCL and LCL sea freight directly to Port Klang (Selangor) and Pasir Gudang (Johor) in Peninsular Malaysia, as well as Kuching and Kota Kinabalu ports in East Malaysia.
Need custom IP65 outdoor cabinets, climate-controlled micro data centers, or integrated 48V DC power solutions for your deployment in Malaysia? Speak directly with our application engineering team for technical drawings and competitive factory-direct pricing.
Contact Us