Explore our certified standby UPS power supplies, portable energy storage, heavy-duty industrial generators, and precision regulated power modules engineered for continuous 24/7 mission-critical operations.
Providing custom electrical, thermal, and protocol topology tailored to the dense metropolitan requirements of Seoul Metropolitan Area (SMA).
As one of the world’s most technologically advanced hyper-connected metropolises, Seoul demands unparalleled standardisation in power conversion. Urban density across key technology hubs—such as Pangyo Techno Valley, Digital Media City (DMC), Guro Digital Complex, and Yeouido Financial District—creates unique power distribution challenges. Space inside outdoor cabinets, subterranean utility vaults, micro data centers, and rooftop 5G small cells is heavily constrained.
Standard off-the-shelf power converters frequently fail to satisfy the complex interplay of high power density (up to 45W/in³), wide-input DC voltage swings, strict EMC/EMI emissions compliance (KC Certification, CISPR 32 Class B), and low acoustic noise signatures mandated in Korean commercial zones.
Our OEM manufacturing model addresses these localized challenges by delivering bespoke DC-DC topologies (including Phase-Shifted Full-Bridge, Resonant LLC, and Synchronous Buck-Boost architectures) utilizing advanced Gallium Nitride (GaN) and Silicon Carbide (SiC) switches. These components achieve conversion efficiencies exceeding 96.8% while maintaining continuous operating temperature tolerances from -40°C up to +75°C.
Engineering topologies supporting nominal 12VDC, 24VDC, 48VDC, 110VDC, and 400V HVDC rails with ultra-wide ±40% input windows to withstand grid transient fluctuations and battery discharge curves without output degradation.
Up to 3000VDC input-to-output isolation with integrated common-mode choke filtering, ensuring zero ground loops and strict compliance with Korea's National Radio Research Agency (RRA) regulations.
Embedded Web Servers and SNMPv3 telemetry microcontrollers allowing Seoul-based Network Operations Centers (NOCs) to monitor voltage rails, ambient thermal points, load currents, and switch remote channels in real time.
How custom OEM DC converter platforms empower smart city networks, industrial automation, and rapid-transit systems across South Korea.
Seoul maintains one of the highest 5G user densities globally. Telecom operators require ultra-compact, pole-mounted outdoor DC-DC converters to step down 48VDC bus power to 12VDC/24VDC for massive MIMO radios, optical transceivers, and edge computing units. OEM customizations include IP67 weatherproof enclosures, integrated low-voltage disconnect (LVD), and surge protection up to 10kV to withstand summer monsoon conditions.
In the industrial belts surrounding Gyeonggi-do and Incheon, modern smart factories rely on Autonomous Guided Vehicles (AGVs) and Autonomous Mobile Robots (AMRs). OEM DC-DC step-down converters stabilize fluctuating internal lithium battery voltages (24V–72V range) into regulated, ripple-free 12V/24V DC outputs to feed onboard LiDAR sensors, industrial PCs, and robotic actuators without system resets.
Seoul Metro operates one of the world's busiest underground rail networks. Our OEM DC-DC converters are designed to convert 110VDC substation battery bank power into highly stable 24VDC control rails for trackside signaling switches, emergency lighting, and automated fare collection gates. Enhanced vibration resistance per IEC 61373 ensures multi-decade service life.
Aligned with South Korea’s "Green New Deal", Seoul is expanding urban solar PV microgrids and EV fast-charging stations. Our high-power isolated DC-DC modules facilitate bi-directional power flow, enabling battery energy storage systems (BESS) to buffer grid peak loads and deliver clean auxiliary power to charger controllers.
Evaluate input/output dynamics, thermal performance, and control capabilities across our OEM DC converter and power system lines.
| Converter Series | Nominal Input Range | Output Voltage & Current | Efficiency (Peak) | Isolation Rating | Remote Telemetry | Target Seoul Applications |
|---|---|---|---|---|---|---|
| ICT-DC OEM Isolated Series | 18 – 36 VDC / 36 – 72 VDC | 12 VDC, 24 VDC (Up to 50A) | 94.5% | 1500 VDC | Dry Contact Alarms | Broadband Access, SCADA, AMR Logistics |
| ICT Modular Hot-Swap Shelf | 100 – 240 VAC / 48 VDC Bus | 12V, 24V, 48V (Up to 300A) | 96.2% | 3000 VDC | HTTP Web, SNMPv3, REST API | Central Office Telecom, 5G C-RAN, Public Safety |
| High-Voltage Industrial HVDC | 200 – 400 VDC | 24 VDC, 48 VDC (Custom OEM) | 96.8% | 3000 VDC | CANbus / Modbus RTU / SNMP | Seoul Metro Rail Signaling, EV Superchargers |
| Compact DIN-Rail Series | 90 – 264 VAC / 120 – 370 VDC | 12V, 24V, 48V (100W – 480W) | 93.0% | 3000 VDC | Form-C Relay Out | Smart City IoT Enclosures, Traffic Signal Cabinets |
| Pure Sine Wave Inverter Series | 12V / 24V / 48V VDC Input | 110V / 220V AC (Pure Sine) | 92.0% | Galvanic Isolation | Ethernet SNMP Management | Field Emergency Power, Sensitive Test Equipment |
Combining decades of North American engineering precision with agile OEM/ODM custom manufacturing tailored for East Asian deployments.
From initial mechanical chassis modeling (1U, 2U, DIN-rail, outdoor NEMA/IP67) to printed circuit board layout, high-frequency transformer design, and custom firmware development. We deliver working engineering prototypes within accelerated timeframes to match fast-moving Korean project schedules.
Every custom OEM production run undergoes 100% Automated Optical Inspection (AOI), full-load thermal burn-in testing, high-potential voltage withstand testing, and environmental stress screening. Products carry KC Certification, CE, UL, and RoHS compliance to ensure smooth clearance and rapid deployment in Seoul.
Standardize your entire remote site power architecture with our fully compatible module ecosystem.
Available in wide input ranges with ultra-low output ripple. Provides total galvanic isolation between ground systems to protect sensitive radios and sensors.
Single and dual-bus load distribution panels with individual fuse/breaker channel monitoring, Ethernet remote power cycling, and automated load shedding.
Space-saving DIN-rail power supplies, battery chargers, and power distribution units optimized for industrial automation cabinets and roadside enclosures.
Clear, direct answers regarding custom OEM DC converter manufacturing, localized certification, and delivery logistics serving Seoul.
Korea Certification (KC Mark) issued by the National Radio Research Agency (RRA) certifies that electrical and electronic equipment meets South Korea’s safety and Electromagnetic Compatibility (EMC) standards. Operating uncertified converters in commercial or public infrastructure in Seoul risks regulatory fines and grid interference. All our custom OEM DC converters manufactured for South Korea undergo pre-compliance testing to guarantee hassle-free KC certification.
We offer comprehensive OEM design options including wide input DC ranges (12V, 24V, 48V, 110V, 400V), custom output voltage trim levels, specialized connector pinouts (Anderson, Molex, terminal blocks), custom 19-inch or 23-inch rack-mount chassis, DIN-rail clips, conformally coated PCBs for high-humidity protection, and custom SNMP MIBs for NOC software integration.
Seoul experiences severe seasonal temperature differentials—ranging from winter lows below -15°C to humid summer highs exceeding +35°C (with internal cabinet temperatures reaching up to +65°C). Our converters utilize industrial-grade components rated for -40°C to +75°C, high-efficiency aluminum heat-sink extrusions, dynamic thermal derating protection, and optional fanless convection cooling to prevent field thermal shutdowns.
Yes. Our modular power system shelves accommodate hot-swappable rectifier and DC-DC converter modules with active internal current sharing. If one power module fails, the remaining active modules instantly pick up the load without output voltage interruption, and the faulted unit can be replaced live without powering down critical site equipment.
Custom OEM engineering prototypes are typically delivered within 4 to 6 weeks following engineering design freeze. Production batch delivery to Seoul logistics hubs (such as Incheon International Airport or Busan Port) generally takes 6 to 8 weeks, supported by dedicated account managers to handle import logistics and documentation smoothly.
Intelligent models feature an integrated Ethernet communication card hosting an embedded HTML web GUI and SNMPv1/v2c/v3 protocols. Systems engineers in Seoul can monitor real-time bus voltage, channel output currents, temperature sensor readings, and configure automated email/SNMP alarm traps. Individual outputs can also be remotely rebooted via browser or command line without dispatching field technicians.
Partner with an established manufacturer trusted by telecommunications leaders, smart factory integrators, and critical infrastructure operators serving Seoul. Share your electrical specifications, chassis constraints, and project timeline with our engineering team today.